l know l could just purchase new rubber seals, but is there anything else l can do that is cheaper?

http://img520.imageshack.us/my.php?image=024ub8.jpg

My window is open, as you can see the rubber is fine, its just that its sort of bending inward a little.

This Next picture, the window and door is closed
http://img520.imageshack.us/my.php?image=025js3.jpg

There is alittle space which lets a draft into my car... and its getting cold... =[

this Next picture is a view from the inside, the door and window is closed.

http://img185.imageshack.us/my.php?image=026dv9.jpg

If anyone could help, Thanks a lot.If l have to ultimately buy a new rubber seal, then so be it.But l would wanna try a quick fix.
Thanks!

try some silcone under the seal in the spots where it is leaking and build it back out that way or salvage yards

First I'd ask if anyone has been using the glass as a handle? Then go into the window/door seal on the back side and try to build it back up. Roll plastic or some other materiel to repack the seal.

very easy, order it from cjponyparts.com and get a screwdriver. They will give you any help for questions that you have.